Comparison Between MX8 VS MX6: Which is Better?

Zodiac MX6 and MX8 are the two most popular suction side pool cleaners. Now you might get confused that which one is better for you. Here is the complete comparison of the two, though both of them share the same technology yet there are some major differences between them. Choose the one that is most suitable for you.

Zodiac MX8 In-Ground Suction Side Pool Cleaner – Overview

Zodiac MX8 In-Ground Suction Side Pool CleanerFeatures

  • Low-flow design
  • Cleans both the floor and walls
  • Twist-locking hose sections
  • Energy saver
  • The flow regulator is present
  • Cyclonic suction for powerful cleaning
  • X-Trax tiers allow the maneuverability

Zodiac’s MX8 is a ground-breaking and effective suction side pool cleaner with a long history. While some new models are manufactured but have a very little life span, the MX8 has been available for quite a long time. This is a demonstration of its prominence and furthermore has given Zodiac time to refine the mechanics that helps in cleaning the floors and dividers of your pool ground.

The Zodiac MX8 collects dirt and trash off your pool’s floor and walls up to the waterline and keeps your pool clear and shiny. Its wide cleaning way permits it to catch more garbage along its way. The disadvantage is that it battles with tacky trash. This sort of garbage can get stuck up in the propeller, so in the event that you have that kind of trash in your pool, you could consider different alternatives here.

The MX8 utilizes a protected Flex Power Turbine innovation which permits the cleaner to perform at flow rates as low as 20 GPM. This implies less energy utilization and less mileage on your pool cleaner. There is a removable channel that can be flipped to zero de of the trash. The MX8 associates with your skimmer or dedicated suction line, passing the trash into your skimmer bushel and pool channel. The MX8 suction pool cleaner moves in every direction to ensure the proper pool cleaning.

  • Easily climb on walls up to water line
  • 1-year warranty
  • Less energy usage
  • Expensive than MX6


Zodiac MX6 In-Ground Suction Side Pool Cleaner – Overview

Zodiac MX6 In-Ground Suction Side Pool CleanerFeatures

  • Do not use any booster pump
  • Energy saver
  • MX Flow regulator helps in proper water flow
  • Can clean both walls and floor of the pool
  • 30’ hose is present
  • Easy to handle

The Zodiac MX6 Pool Cleaner is a minimized adaptation of the MX8 but still, it is helpful in cleaning your pool’s floor and walls up to the waterline. The cyclonic pull gives prevalent vacuum power much the same as the MX8. There is a built-in X-drive Navigation system that works as the brain of the MX6 pool cleaner. It cannot move in a backward direction but the unit can turn its treads freely, permitting it to change direction quickly to arrive at the corners and hole of your pool.

The MX6 offers ideal suction side cleaning, however requires less water stream. The MX Flow Regulator controls the high flow, reduces energy, and permits it to be productive at lower speeds. The capacity to run at a lower stream makes this suction side pool cleaner an ideal decision for pool proprietors with 2-speed or variable speed pumps. This permits clients to run their pumps at lower speeds all the more utilizing less energy and getting a good deal on month-to-month working expenses.

The MX6 accompanies a 30′ hose. In any case, you can buy additional hose areas (sold in 1-meter segments) in the event that you need them for a bigger pool.

  • Compact and easy to handle
  • Powerful suction pool cleaner
  • 1-year warranty
  • Can also clean walls
  • Only for small and medium-size pools
  • Change of track is needed
  • Inlet clogs with large debris


Comparison Table



Suction Type




It doesn’t move in the backward direction

It can move in both the directions

Cleaning Path



Flow inlet 



Hose length



Dirt inlet






Body structure



MX6 VS MX8 – Performance

The MX8 accompanies double twister cleaning innovation that empowers it to clean a more extensive space. Subsequently, this innovation isn’t really more remarkable than the MX6’s one.

The MX8 likewise has 2 edges on the last, one is bigger, and they are joined on the two sides of the middle. On the other side, the MX6 has recently a solitary cutting edge that is present at the middle.

Since the two models give practically a similar force, their exhibition is dictated by the number of edges. This implies that the MX8 defeats the MX6 with regard to execution.

MX6 VS MX8 – Cost

At the point when two machines are from a similar product offering similar fundamental capacities, the value boils down to the prices. It is a simpler method to see which model is superior to the next.

In the present circumstance, the MX6 is more moderate contrasted with the MX8. The MX6 may be more reasonable yet it additionally offers not exactly the MX8.

For the most part, the MX6 beats the MX8 with regard to the cost.

MX6 VS MX8 – Design

These gadgets have practically a similar design and offer similar services. In any case, one preferred position of the MX8 is the 2 directional tread tiers that are situated at the base – they make it simpler for the unit to back up and change its way if there is any shield or obstacle in the path.

The MX6 accompanies solitary stuff that can’t permit it to move out of predicaments without your assistance. You can undoubtedly presume that the MX8 wins regarding the plan, which is valid.

MX6 VS MX8 – Features

A few clients contend that the MX8’s features identifying with the climbing capacity are only a marketing strategy. This is valid since both the MX8 and the MX6 can climb the walls and steps with no issue.

Notwithstanding, there are two fundamental features that make the MX8 edge out the MX6. These are:

  • The double cyclone cleaning system
  • The long hoses (6-foot) have a great deal of effect when cleaning your pool.

The Verdict

Both the MX8 and MX6 are productive and ground-breaking suction side cleaners. The MX8 has more weight and bulkier yet it can deal with bigger garbage and bigger surfaces. The MX6 is reduced and lightweight and is more qualified for more modest pools.

The MX8 has double cyclonic pull power, while the MX6 just has single. Both of the models work on a lower water flow, which means they’re both energy productive. The MX8 certainly looks harder, as we would like to think.

Both of these cleaners are quite durable and will last for many years. Both of them have the capability to deliver what you require. We lean towards the MX8, and here’s the reason.

Indeed, it is more costly, yet for the underlying speculation, you get a couple of additional specifications.  It has a more extensive hose that accompanies a channel. MX6 works well on only small debris. It accompanies a more drawn-out hose, which makes it reasonable for little pools as well as bigger ones.

Lastly, you never need to stress over the MX8 being stuck with its two gearboxes, enabling it to move in both forward and backward directions. Consequently, it can release itself from any dilemma and can be left unassisted. The MX6 may require some help on the off chance that it gets trapped.

Thus, we say that feel free to make the interest in the MX8. The MX8 can do everything the MX6 can do and many other things, making it the better cleaner, and the better decision.


What is the difference between Zodiac MX6 and MX8?
The main difference between Zodiac MX6 and MX8 is the suction type which is cyclonic in MX6 and Dual-cyclonic in MX8. Moreover, the hose is 30’ in MX6 and MX8 has a 36’ hose. MX8 has all the features that MX6 has but MX8 has more features than MX6.
What is the best suction pool cleaner?
MX8 is definitely the best suction pool cleaner. It has all the features that anyone who owns a pool desires. It is affordable and reasonable. Its 2 gearbox helps to move the cleaner in any direction.
How does the Zodiac MX6 work?
It works by associating straightforwardly to your skimmer or a dedicated suction line that pulls in water to the siphon. The cleaner at that point moves around the pool, sucking up silt and debris and sending it to the siphon channel bin and the pool channel. At last, the siphon pushes the newly sifted clean water once again into your pool.
How long do pool vacuums last?
It depends on the brand of the pool cleaner you are using. It is estimated that a good quality cleaner can last up to 3-6 years depending upon its usage.

Leave a Comment